Ricoh P 310 Setup Guide

15
Connecting the Machine via USB or Ethernet
DYG154
DYG153
● For details about IPv4 or IPv6 settings manually, see
User's Guide.
● When connecting the machine via USB, USB cable is
necessary to set up. Do not connect the cable until you
are instructed to do so on the screen.
● When connecting the machine via the Ethernet, the
Ethernet cable is necessary to set up.
DYH608

M 320FB/320F
1. Press [Quick Setup].
For details about [Detailed Setup], see User's Guide.
ECC292
To use the fax function, configure the settings on page
16 "3. FAX Settings (M 320FB/320F only)".

M 320
1. Press the [ ] or [ ] key to select [Quit Setup], and then the
[OK] key.
Other Setup
22
Network Setup
M0ESIC0011
Quit Setup
2. Press the [OK] key.
To use the printer driver, install the printer driver
according to the procedure on page 19 "4. Installing the
Printer Driver".

Ricoh P 310 Specifications

General

Brand	Ricoh
Model	P 310
Category	All in One Printer
Language	English