1. Easy Setup Using Wi-Fi Direct
This chapter describes basic troubleshooting procedures.
Checking the SSID
• Before turning on the machine, insert the wireless LAN option into the USB port on the back of the
machine.
• Before doing the following procedure, install the printer driver. For details, see Setup Guide.
• Confirm that wireless settings are configured. If not, see Setup Guide to configure the settings.
1. Print the configuration page.
For details about printing the configuration page, see User’s Guide.
2. Write down the SSID shown under "Wireless Direct Settings" on the configuration page.
3
To Next Page
Loading...
Need help?
General
