Ricoh P C300W - Administrator Settings and Access; Password Protection; User Restriction Settings; List of Options and IP Address Information

9
Connecting the Machine via USB or Ethernet
DUE077
DUE078
● For details about IPv4 or IPv6 settings manually, see
User's Guide.
● When connecting the machine via USB, USB interface
cable is necessary to set up.
ECC037
● When connecting the machine via the Ethernet, the
Ethernet interface cable is necessary to set up.
ECC036
1. Press the [ ] or [ ] key to select [Wired (Ethernet)], and
then the [OK] key.
Network Wizard
12
Wired (Ethernet)
DYG081
Wireless (Wi-Fi)
2. Press the [ ] or [ ] key to select [Quit Setup], and then the
[OK] key.
ECB240
Quit Setup
IPv4 Configuration
IPv6 Configuration
44
Network Wizard
To use the printer driver, install the printer driver
according to the procedure on page 10 "3. Installing
the Printer Driver".