Copying
44
2
C Select [Sort Only] using {U} or {T}, and then press the {OK} key.
The “Programmed” message appears.
D Enter the number of copy sets using the number keys.
E Place the originals.
When placing originals on the exposure glass, start with the first page to be
copied. When placing originals in the ARDF, set the first page on the top.
F Press the {Start} key.
When placing originals on the exposure glass, press the {q} key after all
originals are scanned.
Note
❒ To display the screen in step
B
, select [On] for [Rotate Sort] with Copier Fea-
tures in User Tools.
❒ To cancel this function in step
A
, press the {Sort/Staple} key again. Make
sure the indicator goes off.
Reference
“Copier Features: Auto Tray Switching”, General Settings Guide
“Tray Paper Settings: Paper Type: Tray 2”, General Settings Guide
To Next Page
Loading...
Need help?
General
