Using the Scanner Function
46
2
Process Flow
A Scanning commands are sent to the machine (1.) via the TWAIN driver
from a TWAIN-compliant application installed on the client (2.) or stand-
alone (3.) computer.
B The machine (1.) scans the originals.
C Scanned data is edited and stored using the TWAIN-compliant application
on the client (2.) or stand-alone (3.) computer.
Note
❒ When using the machine as the TWAIN scanner, it is not necessary to press
the {Scanner} key on the control panel. When the TWAIN driver becomes
active, the display automatically switches to the following screen:
To Next Page
Loading...
Need help?
General
