How do I fix a faded color or poor tint on my Ricoh Projector?
If the color is faded or the tint is poor on your Ricoh Projector: * Check the settings of [Color Saturation], [R-level], [G- level], and [B-level] in [Image Adjustment]. * Make sure the screen is clean. * Check the settings of [Wall Color Mode] in [Display Settings]. * Make sure the lamp is not near the end of its service life.
What does it mean if the lamp does not turn off and flashes every 2 seconds on Ricoh Projector?
If the lamp on your Ricoh Projector does not turn off and flashes every 2 seconds, the projector has malfunctioned. Disconnect the power cord, wait a while, and then turn the projector on again. If the problem persists, contact your service representative.
How do I fix a dark image on my Ricoh PJ X4240N?
To address a dark image on your Ricoh Projector: * Check the settings of [Brightness] and [Contrast] in [Image Adjustment]. * Make sure the lamp is not near the end of its service life. * Check the settings of [RGB Input Range] in [Image Adjustment]. * Make sure [3D Projection] in [Display Settings] is set to [Off].
Why does my Ricoh PJ X4240N display a temperature error and shut off?
If the Ricoh Projector displays a "Temperature Error" and turns off, it could be due to overheating or use in a high-temperature environment. Ensure that the projector's intake and exhaust vents are not blocked to allow proper ventilation. Then, disconnect the power cord, wait for a while, and turn the projector on again.
What to do if the Ricoh PJ X4240N Projector lamp turned off during operation?
If your Ricoh Projector lamp turns off during operation or doesn't turn on, it could be due to overheating, the lamp's service life expiring, or a malfunction. Try disconnecting the power cord, waiting a while, and then turning the projector back on. If the lamp is burnt out, it needs replacement.
How to troubleshoot wired LAN being disabled on Ricoh Projector?
Check the settings of [Wired LAN Settings] in [Network Settings] under [Network/USB Settings].
What to do if my Ricoh PJ X4240N Projector turned off and the lamp flashes every 1 second?
If your Ricoh Projector turned off during operation, or it does not turn on and flashes every 1 second, disconnect the power cord, and reinstall the lamp cover correctly.
Why does my Ricoh PJ X4240N Projector display 'Fan Error' and turn off?
If your Ricoh Projector displays a 'Fan Error' and turns off, the cooling fan in the projector has malfunctioned. Disconnect the power cord and contact your service representative.
Why does my Ricoh Projector not turn on?
If your Ricoh Projector doesn't turn on, it may have malfunctioned. Disconnect the power cord and contact your service representative.
Why won't the lamp on my Ricoh PJ X4240N turn off and keeps flashing?
If the lamp on your Ricoh Projector does not turn off and flashes every 2 seconds, it means that the projector has malfunctioned. Disconnect the power cord, wait a while, and then turn on the projector again. If the problem persists, contact your service representative.
General| Resolution | XGA (1024 x 768) |
|---|---|
| Display Technology | DLP |
| Throw Ratio | 1.96 - 2.15:1 |
| Image Size | 30-300 inches |
| Speaker | 10 W |
| Brightness | 4200 ANSI Lumens |
| Connectivity | HDMI, VGA, USB |
| Zoom Ratio | 1.1x |
| Keystone Correction | Horizontal ±30° |
| Input Terminals | HDMI, VGA, USB |
| Output Terminals | VGA |
| Network | Wired LAN |
| Lamp Life | 4, 000 hours (Normal mode), 5, 000 hours (Eco mode) |
| Projection Lens | F=2.5-2.7, f=22.5-24.75mm |
| Power Consumption | 350W (Normal mode), 280W (Eco mode) |
| Noise Level | 37 dB (Normal mode), 30 dB (Eco mode) |
To Next Page
