Why is my Notebook or PowerBook computer screen not displaying a presentation on the Ricoh Projector?
Some Notebook PCs may deactivate their own screens when a second display device is in use. Each has a different way to be reactivated. Refer to your computer’s documentation for detailed information.
What does a flashing red light on my Ricoh PJ XL4540 mean when powering up?
When the Ricoh Projector is powering up (warming up), the indicator light will flash red every 1.0 second.
Why does my Ricoh PJ XL4540 Projector have no image on the screen?
If no image appears on the screen, ensure all the cables and power connections are correctly and securely connected. Also, check that the pins of terminals are not crooked or broken. Make sure you have removed the lens cap and the projector is switched on. Finally, ensure that the 'AV Mute' feature is not turned on.
What to do if the Ricoh PJ XL4540 Projector image is too small or too large?
If the image appears too small or too large, try moving the projector closer to or further from the screen. Alternatively, press the 'Aspect' button on the remote control or press the 'Menu' button on the projector panel, go to 'Screen --> Aspect Ratio' and try the different settings.
Why is my Ricoh PJ XL4540 image unstable or flickering?
If the image is unstable or flickering, try adjusting the 'Phase' or 'Clock'. You can also change the monitor setting from your computer. Finally, check and reconfigure the display mode of your graphic card to make it compatible with the product.
What to do if the Ricoh PJ XL4540 image is out of focus?
If the image is out of focus, adjust the Focus Ring on the projector lens. Also, make sure the projection screen is between the required distance.
What to do if the Ricoh PJ XL4540 is over temperature?
If the projector is overheating, make sure air inlets and outlets are not blocked. Also, ensure the environment temperature is under 40 degrees C.
Why is the image stretched on my Ricoh Projector when displaying 16:9 DVD?
If the image is stretched when displaying a 16:9 DVD, change 'Aspect' by pressing the key on remote control or OSD menu to show image with proper aspect ratio.
Why is the Ricoh PJ XL4540 Projector image reversed?
If the image is reversed, select 'Screen --> Ceiling Mount' from the OSD and adjust the projection direction.
What to do if the Ricoh PJ XL4540 Projector displays a partial, scrolling, or incorrectly displayed image?
If the image is partial, scrolling, or incorrectly displayed, press 'Auto Set' on the remote control. You can also adjust the resolution of the computer. Another option is to press the toggle output settings, for example: [Fn]+[F3].
General| Native Resolution | XGA (1024 x 768) |
|---|---|
| Projection System | DLP |
| Resolution | 1024 x 768 |
| Lamp Life | 4, 000 hours |
| Lamp Life (Eco Mode) | 5000 hours |
| Projection Size | 30 to 300 inches |
| Inputs | HDMI, VGA |
To Next Page
