6. Print the image. Is the problem resolved?
Yes Finished!
No Perform the operation in page 103 "Curling".
(c) Correcting П curl
1. In the [Main Unit: Paper Feed/ Output] group of [Adjustment Settings for Operators], set
[П Curl Correction Level: Small] for 0310: [Correct Output Paper Curl].
2. Print the image. Is the problem resolved?
Yes Finished!
No Go to the next step.
3. Set [П Curl Correction Level: Large] for 0310: [Correct Output Paper Curl].
4. Print the image. Is the problem resolved?
Yes Finished!
No Perform the operation in page 103 "Curling".
Paper Feed Problems Affecting Image Quality
105
To Next Page
Loading...
