Ricoh Pro C5100S - Page 35

When using paper of Paper Weight 5 to 8, the setting specified in [Adjust Registration Paper Buckle
(Thick Paper)] takes precedence.
Press [+] or [−] to adjust the degree of paper arching.
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
[Tray 1-4] 0 5 -5 1 mm
[Bypass Tray]
[2 Sided]
[LCT]
0104: [Adjust Registration Paper Buckle (Thick Paper)]
Adjust the degree of paper arching at the registration gate when using paper of Paper Weight 5 to 8.
By adjusting the degree of paper arching for relatively stiff thick paper, you can prevent image
misalignment and paper skew.
For paper of Paper Weight 1 to 4, specify [Adjust Registration Paper Buckle].
Press [+] or [−] to adjust the degree of paper arching.
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
[Paper Weight 5] 0 5 -5 1 mm
[Paper Weight 6]
[Paper Weight 7]
[Paper Weight 8]
0106: [Criteria for Paper Weight]
Specify the criteria for identifying the paper weight.
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
[Tray: Paper Weight 2] 70 999 0 1 m
[Tray: Paper Weight 3] 90 999 0 1 m
Setting Values
33