10. Press [Change] for "Advanced Settings".
The advanced settings for custom paper adjustment appear.
Access Using Web Image Monitor
1. Log in as the network administrator from Web Image Monitor.
2. Point to [Device Management], and then click [Configuration].
3. Click [Custom Paper] under "Device Settings".
4. Check the radio button next to the number of the custom paper profile you wish to adjust,
and then click [Program/Change].
The advanced settings for custom paper adjustment appear.
5. Change the settings as desired, and then click [OK].
The setting is changed.
6. Log out.
Accessing Advanced Settings
65
To Next Page
Loading...
