No. Item Description
10 [Adjust Erase Margin of
Leading Edge]
Adjust the mask width at the leading edge of the image.
11 [Adjust Erase Margin of
Trailing Edge]
Adjust the mask width at the trailing edge of the image.
12 [Adj Magnification of
Side2 Across Feed]
Adjust the vertical image scaling on Side 2 of the paper
according to the paper expansion or shrinkage.
13 [Adj Magnification of
Side2 With Feed]
Adjust the horizontal image scaling on Side 2 of the
paper according to the paper expansion or shrinkage.
14 [Trailing Edge Full Bleed] Specify whether or not to enable the mode to omit the
margin at the trailing edge of the paper.
Line Speed Adjustment
For details about the following items, see page 86 "Line Speed Adjustment".
No. Item Description
15 [Process Speed Setting] Adjust the machine's print speed.
16 [Registration Motor Feed
Speed Adj]
Adjust the registration motor's speed.
17 [First Transport Motor Feed
Speed Adj]
Adjust the first transport motor's speed.
18 [Second Transport Motor
Feed Speed Adj]
Adjust the second transport motor's speed.
19 [Third Transport Motor Feed
Speed Adj]
Adjust the third transport motor's speed.
20 [Relay Trnsprt Mtr Feed
Speed Adj: CW]
Adjust the relay transport motor's rotation speed
(clockwise rotation).
21 [Relay Trnsprt Mtr Feed
Speed Adj: CCW]
Adjust the relay transport motor's rotation speed
(counterclockwise rotation).
22 [Paper Transfer Feed Speed
Adjustment]
Adjust the transfer roller's speed.
23 [Fusing Feed Speed
Adjustment]
Adjust the fusing roller's speed.
4. Details of Menu Items in Advanced Settings
72
To Next Page
Loading...
