Ricoh Pro C5110S - Page 157

003
Factory :L:BE *ENG [0 to 1023 / 0 / 1digit/step]
Display/Saves Factory Digital gain adjusting value (L side/BLUE/EVEN Pixel)
Factory Digital gain adjusting value from Main unit warranty process is saved.
Use for design evaluation, analyzing cause of malfunction (abnormal images, SC).
004
Factory :L:BO *ENG [0 to 1023 / 0 / 1digit/step]
Display/Saves Factory Digital gain adjusting value (L side/BLUE/ODD Pixel)
Factory Digital gain adjusting value from Main unit warranty process is saved.
Use for design evaluation, analyzing cause of malfunction (abnormal images, SC).
4688
[Scan Image Density Adjustment]
Adjust density difference for ADF and Book.
002 1-pass DF *ENG [80 to 120 / 103 / 1 %/step]
4690 [White Level Peak Data]
001
F:RE ENG [0 to 1023 / 0 / 1digit/step]
Displays White level peek scanning value (F side/RED/EVEN Pixel).
Adjusts White level by scanning White Basis Board to keep hold of Scanner’s image
signal’s dynamic range when Scanner turns on.
Scan level for White Basis Board when adjusting white level will be given.
When White level peak scanning value is abnormal (adjustment won’t complete),
SC142-00 is given.
Cause of error will show in SP4-646-001.
Use for design evaluation, analyzing cause of malfunction (abnormal images, SC).
SP4-XXX (Scanner)
155