Ricoh Pro C5110S - Page 168

001
CIS GB Adj Error Flag ENG
[0 to 7 / 0 / 1/step]
b 2:Red Gray balance adjusting error
flag (GB_ERR_R)
b 1:Green Gray balance adjusting
error flag (GB_ERR_G)
b 0:Blue gray balance adjusting error
flag (GB_ERR_B)
Display Gray balance adjusting error flag for CIS.
When an error occurs with Gray balance adjust of SP4-705-001, displays the cause.
When an error, SC189-00 (Gray balance adjusting error) will be given.
[Display format] binary
CIS GB Adjusting error flag = (b2, b1, b0)
4747 [CIS Hard Error Flag]
001
CIS Hard Error Flag ENG
[0 to 7 / 0 / 1/step]
b 2: Boot error flag for Marble
(Marble_BOOT_ERR)
b 1:Register read error flag for Marble
(Marble_READ_ERR)
b 0:Register read error flag for Opal
(Opal_READ_ERR)
Displays Hard error flag for CIS.
If an error occurs with CIS communication error detect when DF powers ON, displays the
cause.
When an error, SC185-00 (CIS communication error) will be given.
[Display format] binary
CIS Hard error flag = (b2, b1, b0)
4748
[CIS M-Scan White Level: Avg. R]
Displays main scan white level average value (R Leading edge / Trailing edge) for CIS.
2. Main SP Tables-4
166