Ricoh Pro C5110S - Page 223

5083
[LED Light Switch Setting]
Turns LED lighting ON and OFF at Toner Near End.
001 Toner Near End *CTL
[0 or 1 / 0 / 1/step]
0: OFF
1: ON
5104
[DoubleCount] A3/DLT Double Count (SSP)
Specifies whether the counter is doubled for A3/DLT. "Yes" counts except from the bypass
tray. When "Yes" is selected, A3 and DLT paper are counted twice, that is A4 x2 and LT x2
respectively.
001 0: OFF 1: ON *CTL
[0 or 1 / 1 / 1/step]
0: OFF, 1: ON
002
ManSizeNoFixExchangeOverA3
(D158/159)
*CTL
[0 or 1 / 0 / 1/step]
0: A4 (LT), 1: A3 (DLT)
5112
[Non-Std. Paper Sel.]
Selects On/Off to allow the setting of the custom size.
001 (0:OFF 1:ON) *CTL
[0 or 1 / 0 / 1/step]
0: OFF
1: ON
5113 [Optional Counter Type]
SP5-009 to 721 (Mode)
221
RTB 178
Corrected