Ricoh Pro C5110S - Page 250

004
G-Y *ENG
[0 to 128 / 100 / 1 /step]
128: Darkest density
Adjusts the output color (Y component) ranging from 0 (%) to 128 (%) when Standard
Color (Green) is set in Single Color (No correction).
005
R-M *ENG
[0 to 128 / 100 / 1 /step]
128: Darkest density
Adjusts the output color (M component) ranging from 0 (%) to 128 (%) when Standard
Color (Red) is set in Single Color (No correction).
006
R-Y *ENG
[0 to 128 / 100 / 1 /step]
128: Darkest density
Adjusts the output color (Y component) ranging from 0 (%) to 128 (%) when Standard
Color (Red) is set in Single Color (No correction).
5618 [Color Mode Display Selection]
001
- *CTL
[0 or 1 / 1 / 1/step]
0: ACS, Color, Black & White, Two
Colors, Single colour
1: ACD, Full Color, Black & White
Selects the color selection display on the LCD.
5710 [Custom Setting Paper]
001 Bypass *CTL [0 to 100 / 0 / 1/step]
002 Tray 1 *CTL [0 to 100 / 0 / 1/step]
003 Tray 2 *CTL [0 to 100 / 0 / 1/step]
004 Tray 3 *CTL [0 to 100 / 0 / 1/step]
005 Tray 4 *CTL [0 to 100 / 0 / 1/step]
006 Tray 5 *CTL [0 to 100 / 0 / 1/step]
007 Tray 6 *CTL [0 to 100 / 0 / 1/step]
008 Tray 7 *CTL [0 to 100 / 0 / 1/step]
3. Main SP Tables-5
248