Ricoh Pro C5110S - Page 300

5752
[Copy FlairAPIFunction Setting]
CopyFlairAPI Function enable / disable.
001 0x00 - 0xff *CTL * see BitSwitch below:
bit Setting
meanings
Description
0 1
bit 0
Start of FlairAPI
Server
Off
(Do not Start)
On
(Start)
Sets whether to start exclusive
FlairAPI http server. If it is 0,
scanning FlairAPI function and
simple UI function will be
disabled. The machine installed
Android operating panel
option, set “1”, others set “0”.
bit 1
Access permission of
FlairAPI from outside
of the machine
Disabled Enabled
If it is “0”, accessing is limited
from the machine only, such as
operating panel, SDK/J, MFP
browsers etc... If it is “1”,
accessing is allowed from
outside of FlairAPI such as PC,
Remote UI, IT-Box etc...
bit 2
Switching IPv6 only /
IPv4 (priolity)
IPv6 only IPv4 (priolity)
If it is “0”, limited to IPv6
accessing.
If it is “1”, use IPv4 if it is
available, if not, use IPv6. In this
case, it is not able to access
from android operation panel
when IPv4 is enabled.
bit 3 Reserved - - -
bit 4 Simple UI Function Disabled Enabled
If it is “1”, the machine can be
used Scanner Simple UI. If it is
“0”, requesting URL of Simple
UI returns “404 Not Found”
3. Main SP Tables-5
298