Ricoh Pro C5110S - Page 310

063
Proxy Host *CTL [up to 127 / - / 1/step]
This SP sets the address of the proxy server used for communication between the RCG
device and the gateway. Use this SP to set up or display the customer proxy server
address.
The address is necessary to set up the embedded RCG-N.
• The address display is limited to 128 characters. Characters beyond the 128
character are ignored.
•
This address is customer information and is not printed in the SMC report.
064
Proxy PortNumber *CTL [0 to 0xffff / 0 / 1/step]
This SP sets the port number of the proxy server used for communication between the
embedded RCG-N and the gateway. This setting is necessary to set up the embedded RC
Gate-N.
• This port number is customer information and is not printed in the SMC report.
065
Proxy User Name *CTL [up to 31 / - / 1/step]
This SP sets the HTTP proxy certification user name.
• The length of the name is limited to 31 characters. Any character beyond the 31st
character is ignored.
•
This name is customer information and is not printed in the SMC report.
066
Proxy Password *CTL [up to 31 / - / 1/step]
This SP sets the HTTP proxy certification password.
• The length of the password is limited to 31 characters. Any character beyond the 31st
character is ignored.
•
This name is customer information and is not printed in the SMC report.
3. Main SP Tables-5
308