Ricoh Pro C5110S - Page 313

086
Firmware Size *CTL [- / - / -]
Allows the service technician to confirm the size of the firmware data files during the
firmware update execution.
087
CERT:Macro Ver. CTL [8digits / - / 1digit/step]
Displays the macro version of the @Remote certification. This SP displays 8-digit characters.
088
CERT:PAC Ver. CTL [16digits / - / 1digit/step]
Displays the PAC version of the @Remote certification.
This SP displays 16-digit characters.
089
CERT:ID2Code CTL [17digits / - / 1digit/step]
Displays ID2 for the @Remote certification. Spaces are displayed as underscores (_).
Asterisks (****) indicate that no @Remote certification exists. This SP displays 17-digit
characters.
090
CERT:Subject CTL [17digits / - / 1digit/step]
Displays the common name of the @Remote certification subject. CN = the following 17
bytes. Spaces are displayed as underscores (_). Asterisks (****) indicate that no DESS
exists.
091
CERT:Serial No. CTL [16digits / - / 1digit/step]
Displays serial number for the NRS certification. Asterisks (****) indicate that no DESS
exists. This SP displays 16-digit characters
092
CERT:Issuer CTL [30digits / - / 1digit/step]
Displays the common name of the issuer of the @Remote certification. CN = the following
30 bytes. Asterisks (****)indicate that no DESS exists.
093
CERT:Valid Start CTL [10digits / - / 1digit/step]
Displays the start time of the period for which the current @Remote certification is enabled.
This SP displays 10-digit characters.
094
CERT:Valid End CTL [10digits / - / 1digit/step]
Displays the end time of the period for which the current @Remote certification is enabled.
This SP displays 10-digit characters.
SP5-722 to 998 (Mode)
311