Ricoh Pro C5110S - Page 318

186 RCG-C M DebugBitSW CTL
[0000000 to 11111111 /
00000000 / -]
187 FAX TX Priority CTL
[0 to 1 / 0 / 1/step]
0: OFF
1: ON
200
Manual Polling CTL
[- / - / -]
[Execute]
Executes the center polling manually.
201
Regist Status CTL [0 to 4 / 0 / 1/step]
Displays a number that indicates the status of the @Remote service device.
0: Neither the registered device by the external nor embedded RCG device is set.
1: The embedded RCG device is being set. Only Box registration is completed. In this
status, this unit cannot answer a polling request from the external RCG.
2. The embedded RCG device is set. In this status, the external RCG unit cannot answer a
polling request.
3. The registered device by the external RCG is being set. In this status the embedded RCG
device cannot be set.
4 The registered module by the external RCG has not started.
202
Letter Number *CTL [- / - / -]
Allows entering the number of the request needed for the RCG-N device.
203
Confirm Execute CTL
[- / - / -]
[Execute]
Executes the inquiry request to the @Remote GW URL.
3. Main SP Tables-5
316