Ricoh Pro C5110S - Page 40

014
Corr(Mid):FC *ENG [0.00 to 1.00 / 1.00 / 0.01/step]
Sets Correction Coefficient (Mid) for Page Interval for Job End ProCon (FC).
3539 [Dev Agitating Time :Set]
001
Time *ENG [0 to 3000 / 0 / 1sec/step]
Sets Developer Agitating Time.
010
ON/OFF(by AbsHum) *ENG [0 to 1 / 1 / 1/step]
Sets ON/OFF for Absolute Humidity Correction for Developer Agitating Time.
030
ON/OFF(by Non-use Time) *ENG [0 to 1 / 1 / 1/step]
Sets ON/OFF for Absolute Humidity Correction for Developer Agitating Time.
050
ON/OFF(by Non-use Time) *ENG [0 to 1 / 1 / 1/step]
Sets ON/OFF for Absolute Humidity Correction for Image Coverage Correction.
3554 [Set Expel Dev Mode]
001
Set Expel Dev Mode ENG [0 to 1 / 1 / 1/step]
Sets Execute/Not Execute for Expel Development Mode.
002
Execution Threshold Value:Run ENG [0 to 255 / 0 / 1sec/step]
Sets Time Threshold for Expel Operation Execution when printing is finished.
003
Execution Threshold Value:End ENG [0 to 255 / 15 / 1sec/step]
Sets Time Threshold for Expel Operation Execution when printing.
004
Calculated Value:Half-Speed ENG
[0.00 to 655.35 / 0.67 / 0.01sec/
step]
Coefficient Setting for Expel Time added by Tone Fill Execution for Half-Speed.
011
Required Expel Time:K ENG
[0.00 to 655.35 / 0.00 / 0.01sec/
step]
Displays Required Expel Time:K.
1. Main SP Tables-3
38