008 New Product Information *ENG [0 to 255 / 0 / 1/step]
009 Recycle Counter *ENG [0 to 255 / 0 / 1/step]
010
Date *ENG [0 or 1 / 0 / 1/step]
Uses for Toner Individual Detection.
011
SerialNo. *ENG [0 or 1 / 0 / 1/step]
Uses for Toner Individual Detection.
012
Toner Remaining *ENG [0 to 100 / 100 / 1%/step]
Keeps the data with 1% Step.
013
EDP Code *ENG [0 or 1 / 0 / 1/step]
EDP Code for Toner
014
End History *ENG [0 or 1 / 0 / 1/step]
Tone End/Near End Detection History
015
Refill Information *ENG [0 or 1 / 0 / 1/step]
Refill Detection, IS Detection Information
016
Attachment: Total Counter *ENG [0 to 99999999 / 0 / 1/step]
Writes Main Unit Total Counter Value with binary data when Toner is attached.
017
Attachment: Color Counter *ENG [0 to 99999999 / 0 / 1/step]
Writes Main Unit Color Counter Value with binary data when Toner is attached.
018
End: Total Counter *ENG [0 to 99999999 / 0 / 1/step]
Writes Main Unit Total Counter Value with binary data when End is detected. Writes also
when Near End is detected.
019
End: Color Counter *ENG [0 to 99999999 / 0 / 1/step]
Writes Main Unit Color Counter Value with binary data when End is detected. Writes also
when Near End is detected.
020
Attachment Date *ENG [0 or 1 / 0 / 1/step]
Writes Date when Toner is attached.
SP7-001 to 931 (Data Log)
537
To Next Page
Loading...
