Ricoh Pro C5110S - Page 59

153
deltaPcd[1]:M *ENG [0.0 to 360.0 / 0.0 / 0.1deg/step]
Displays deltaPcd[1] for M/A patch (M).
154
deltaPcd[1]:Y *ENG [0.0 to 360.0 / 0.0 / 0.1deg/step]
Displays deltaPcd[1] for M/A patch (Y).
3675 [Vb:Coef:Setting]
001
Sbp[1] *ENG [0.00 to 2.55 / 1.00 / 0.01/step]
Sets Frequency Correction Coefficient Sbp[1] for OPC Cycle amplitude of Vb.
011
Kbp1 *ENG [0.00 to 2.55 / 1.00 / 0.01/step]
Sets Line Speed: Mid Correction Coefficient Kbp1 for OPC Cycle amplitude of Vb.
012
Kbp2 *ENG [0.00 to 2.55 / 0.90 / 0.01/step]
Sets Line Speed: Low Correction Coefficient Kbp2 for OPC Cycle amplitude of Vb.
051
Sbd[1] *ENG [0.00 to 2.55 / 1.10 / 0.01/step]
Sets Frequency Correction Coefficient Sbd[1] for Development Roller Cycle amplitude of
Vb.
061
Kbd1 *ENG [0.00 to 2.55 / 1.00 / 0.01/step]
Sets Line Speed: Mid Correction Coefficient Kbd1 for Development Roller Cycle amplitude
of Vb.
062
Kbd2 *ENG [0.00 to 2.55 / 0.90 / 0.01/step]
Sets Line Speed: Low Correction Coefficient Kbd1 for Development Roller Cycle amplitude
of Vb.
071
tadj_b:K *ENG
[-0.500 to 0.500 / 0.000 / 0.001s/
step]
Sets tadj_b (K) time for Vb (K).
072
tadj_b:C *ENG
[-0.500 to 0.500 / 0.000 / 0.001s/
step]
Sets tadj_b (C) time for Vb (C).
SP3-XXX (Process)
57