Ricoh Pro C5110S - Page 682

015
FSBPort28 ENG
[0 to 255 / 0 / 1/step]
•
Bit 0: Refresh Roller Drive
Motor (0: Normal, 1: Error)
• Bit 1: Refresh Roller Contact
Sensor (0: Out of Home, 1:
Home)
• Bit 2: FDB_M Set Detection (0:
Set, 1: Unset)
• Bit 3: IH: Enable (0: OFF, 1:
ON)
• Bit 4 to 7: Not used
Displays data register value for FSB_VODKA Port28
016
FSBPort29 ENG
[0 to 255 / 0 / 1/step]
•
Bit 0: High Temperature
Detection: Thermopile Heating
Roller Center (0: High
temperature detected, 1:
Normal)
• Bit 1: High Temperature
Detection: Thermistor Heating
Front (0: High temperature
detected, 1: Normal)
• Bit 2: High Temperature
Detection: Thermopile Heating
Center (0: High temperature
detected, 1: Normal)
• Bit 3 to 4: Not used
• Bit 5: Waste Toner Collection
Motor (BLM) Lock (0: Normal,
1: Error)
• Bit 6: Bottle Waste Toner
Motor (BLM) Lock (0: Normal,
1: Error)
• Bit 7: Fusing Motor (BLM) Lock
(0: Normal, 1: Error)
Displays data register value for FSB_VODKA Port29
7. Input and Output Check
680