Ricoh Pro C5110S - Page 710

093
A3LCT-CPU-PortG ENG
[0 to 255 / 0 / 1/step]
•
Bit 0: -
• Bit 1: -
• Bit 2: Feed Motor STS0 (0:
Ready, 3: E2PROM
Download)
• Bit 3: Transport Motor FAULT
(0: Normal, 1: Not Normal)
• Bit 4: -
• Bit 1: -
• Bit 6: -
• Bit 7: -
Checks Not Normal/Normal condition for Transport Motor and Feed Motor. Displays the
condition: 2: Usable, 1: Unusable regarding Bit 0.
094
A3LCT-CPU-Port1 ENG
[0 to 255 / 0 / 1/step]
•
Bit 0: Slide Detection Sensor 1
(0: Detected, 1: Not Detected)
• Bit 1: Slide Detection Sensor 2
(0: Detected, 1: Not Detected)
• Bit 2: Lower Limit Detection
Sensor (0: No Lower Limit, 1:
Lower Limit)
• Bit 3: Feed Sensor (0:
Detected, 1: Not Detected)
• Bit 4: Paper End Detection
Sensor (0: Detected, 1: Not
Detected)
• Bit 5: Upper Limit Detection
Sensor (0: Upper Limit, 1: No
Upper Limit)
• Bit 6: Paper Detection Sensor
(0: Detected, 1: Not Detected)
• Bit 7: Relay Sensor (0:
Detected, 1: Not Detected)
Checks each Sensor’s information.
7. Input and Output Check
708