Ricoh Pro C5110S - Page 714

103
Tray 2 Set Sensor ENG [0 or 1 / 0 / 1/step]
Displays detection condition for the sensors, SW etc.
104
Tray 3 Set Sensor ENG [0 or 1 / 0 / 1/step]
Displays detection condition for the sensors, SW etc.
105
Tray 4 Set Sensor ENG [0 or 1 / 0 / 1/step]
Displays detection condition for the sensors, SW etc.
106
Tray 2 Size Detection SW ENG [0 or 15 / 0 / 1/step]
Displays detection condition for the sensors, SW etc.
107
Tray 3 Size Detection SW ENG [0 or 15 / 0 / 1/step]
Displays detection condition for the sensors, SW etc.
108
Tray 4 Size Detection SW ENG [0 or 15 / 0 / 1/step]
Displays detection condition for the sensors, SW etc.
109
Bypass Main Scan Length Sensor ENG [0 to 31 / 0 / 1/step]
Displays detection condition for the sensors, SW etc.
110
Bypass Sub Scan Length Sensor ENG [0 or 1 / 0 / 1/step]
Displays detection condition for the sensors, SW etc.
111
Tray 1 Paper End Sensor ENG [0 or 1 / 0 / 1/step]
Displays detection condition for the sensors, SW etc.
112
Tray 2 Paper End Sensor ENG [0 or 1 / 0 / 1/step]
Displays detection condition for the sensors, SW etc.
113
Tray 3 Paper End Sensor ENG [0 or 1 / 0 / 1/step]
Displays detection condition for the sensors, SW etc.
114
Tray 4 Paper End Sensor ENG [0 or 1 / 0 / 1/step]
Displays detection condition for the sensors, SW etc.
115
Bypass Paper End Sensor ENG [0 or 1 / 0 / 1/step]
Displays detection condition for the sensors, SW etc.
7. Input and Output Check
712