Ricoh Pro C5110S - Page 721

184
Duplex Inverter Motor Error ENG
[0 to 31 / 0 / 1/step]
1: Detected
0: Not Detected
Displays the presence of Motor Error.
185
Duplex Transport Motor Error ENG
[0 to 31 / 0 / 1/step]
1: Detected
0: Not Detected
Displays the presence of Motor Error.
186
Duplex Exit Motor Error ENG
[0 to 31 / 0 / 1/step]
1: Detected
0: Not Detected
Displays the presence of Motor Error.
187
Bypass BotPlt Lower Limit Position Sn ENG [0 or 1 / 0 / 1/step]
Displays detection condition for the sensors, SW etc.
188
Bypass BotPlt Upper Limit Position Sn ENG [0 or 1 / 0 / 1/step]
Displays detection condition for the sensors, SW etc.
189
Bypass Tray Set Sensor ENG [0 or 1 / 0 / 1/step]
Displays detection condition for the sensors, SW etc.
190
Regist Upper Guide Plate Sensor ENG [0 or 1 / 0 / 1/step]
Displays detection condition for the sensors, SW etc.
191
Paper Exit Left Guide Plate Sensor ENG [0 or 1 / 0 / 1/step]
Displays detection condition for the sensors, SW etc.
192
Paper Exit Upper Guide Plate Sensor ENG [0 or 1 / 0 / 1/step]
Displays detection condition for the sensors, SW etc.
193
Horizontal Transport Guide Plate
Sensor
ENG [0 or 1 / 0 / 1/step]
Displays detection condition for the sensors, SW etc.
Input Check Table
719