Ricoh Pro C5110S - Page 729

040
Booklet Stapler Full Sensor 2 ENG [0 or 1 / 0 / 1/step]
Acquires Sensor information for the specified sensors. Displays signal level for Sensors as it
is.
041
Punch Registratioin Detection
Sensor
ENG [0 or 1 / 0 / 1/step]
Acquires Sensor information for the specified sensors. Displays signal level for Sensors as it
is.
042
Punch RPS Sensor ENG [0 or 1 / 0 / 1/step]
Acquires Sensor information for the specified sensors. Displays signal level for Sensors as it
is.
043
Corner Stapler Leading Edge
Detection Sensor
ENG [0 or 1 / 0 / 1/step]
Acquires Sensor information for the specified sensors. Displays signal level for Sensors as it
is.
044
Corner Stapler Staple End Sensor ENG [0 or 1 / 0 / 1/step]
Acquires Sensor information for the specified sensors. Displays signal level for Sensors as it
is.
045
Booklet Stapler Staple End
Sensor: Front
ENG [0 or 1 / 0 / 1/step]
Acquires Sensor information for the specified sensors. Displays signal level for Sensors as it
is.
046
Booklet Stapler Staple End
Sensor: Rear
ENG [0 or 1 / 0 / 1/step]
Acquires Sensor information for the specified sensors. Displays signal level for Sensors as it
is.
047
Shift Tray Lower Limit Sensor 1 ENG [0 or 1 / 0 / 1/step]
Acquires Sensor information for the specified sensors. Displays signal level for Sensors as it
is.
048
Shift Tray Lower Limit Sensor 2 ENG [0 or 1 / 0 / 1/step]
Acquires Sensor information for the specified sensors. Displays signal level for Sensors as it
is.
Input Check Table
727