Ricoh Pro C5110S - Page 731

057
Dynamic Roller Open/Close
Guide Plate Sensor
ENG [0 or 1 / 0 / 1/step]
Acquires Sensor information for the specified sensors. Displays signal level for Sensors as it
is.
058
Tray Upper Limit SW ENG [0 or 1 / 0 / 1/step]
Acquires information for the specified switches. Displays signal level for Switches as it is.
059
Paper Exit Open/Close Guide
Plate Limit SW
ENG [0 or 1 / 0 / 1/step]
Acquires information for the specified switches. Displays signal level for Switches as it is.
060
Punch DIP SW1 ENG [0 or 1 / 0 / 1/step]
Acquires information for the specified switches. Displays signal level for Switches as it is.
061
Punch DIP SW2 ENG [0 or 1 / 0 / 1/step]
Acquires information for the specified switches. Displays signal level for Switches as it is.
6147
[FIN INPUTCheck 3KFIN (100Bind)]
-
001 Entrance Sensor ENG
[0 or 1 / 0 / 1/step]
Paper Detected = 0
Paper Not Detected = 1
002 Proof Exit Sensor ENG
[0 or 1 / 0 / 1/step]
Paper Detected = 0
Paper Not Detected = 1
003 Shift Tray Exit Sensor 1 ENG
[0 or 1 / 0 / 1/step]
Paper Detected = 0
Paper Not Detected = 1
004 Staple Exit Sensor ENG
[0 or 1 / 0 / 1/step]
Paper Detected = 0
Paper Not Detected = 1
Input Check Table
729