Ricoh Pro C5110S - Page 75

001
Img Area Thresh:K ENG [0.0 to 25.5 / 1.5 / 0.1%/step]
Sets Image Area Threshold for Toner Refresh Mode Bk.
002
Img Area Thresh:C ENG [0.0 to 25.5 / 1.5 / 0.1%/step]
Sets Image Area Threshold for Toner Refresh Mode C.
003
Img Area Thresh:M ENG [0.0 to 25.5 / 1.5 / 0.1%/step]
Sets Image Area Threshold for Toner Refresh Mode M.
004
Img Area Thresh:Y ENG [0.0 to 25.5 / 1.5 / 0.1%/step]
Sets Image Area Threshold for Toner Refresh Mode Y.
011
K Amount ENG [0.0 to 65535.0 / 0.0 / 0.1mm]
Displays required Toner Refresh amount for Bk.
012
C Amount ENG [0.0 to 65535.0 / 0.0 / 0.1mm]
Displays required Toner Refresh amount for C.
013
M Amount ENG [0.0 to 65535.0 / 0.0 / 0.1mm]
Displays required Toner Refresh amount for M.
014
Y Amount ENG [0.0 to 65535.0 / 0.0 / 0.1mm]
Displays required Toner Refresh amount for Y.
021
Max Between Pattern ENG [40 to 255 / 40 / 1mm]
Sets Max Between Pattern for Toner Refresh.
022
Max Job End Pattern ENG [0 to 10000 / 1000 / 1mm]
Sets Max Job End Pattern for Toner Refresh.
031
Between Ptn flag ENG [0 to 1 / 0 / 1/step]
Displays Execution Between Pattern flag. The flag turns to "1" automatically when the
required Refresh amount exceeds the below mentioned Between Pattern Start threshold,
and then executes Between Pattern.
032
Between Ptn Start threshold ENG [0 to 10000 / 50 / 1mm]
Sets Between Pattern Start threshold.
Between Pattern starts when the required Refresh amount exceeds this threshold.
SP3-XXX (Process)
73