Ricoh Pro C5110S - Page 789

177
Duplex Exit Mtr:Feed Speed:Low
Speed
ENG [0 or 1 / 0 / 1/step]
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
178
Tray 1 Lift Motor: (Up: 1s) ENG [0 or 1 / 0 / 1/step]
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
179
Tray 1 Lift Motor: (Down: 1s) ENG [0 or 1 / 0 / 1/step]
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
180
Tray 2 Lift Motor: (Up: 1s) ENG [0 or 1 / 0 / 1/step]
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
181
Tray 2 Lift Motor: (Down: 1s) ENG [0 or 1 / 0 / 1/step]
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
182
Tray 3 Lift Motor: (Up: 1s) ENG [0 or 1 / 0 / 1/step]
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
183
Tray 3 Lift Motor: (Down: 1s) ENG [0 or 1 / 0 / 1/step]
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
184
Tray 4 Lift Motor: (Up: 1s) ENG [0 or 1 / 0 / 1/step]
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
185
Tray 4 Lift Motor: (Down: 1s) ENG [0 or 1 / 0 / 1/step]
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
186
Tandem Tray Transport Motor
(Rev: 1s)
ENG [0 or 1 / 0 / 1/step]
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
187
Tandem Tray Transport Motor
(Fwd: 1 s)
ENG [0 or 1 / 0 / 1/step]
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
188
Exit/Inverter JG SOL ENG [0 or 1 / 0 / 1/step]
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
Output Check Table
787