Ricoh Pro C5110S - Page 791

200
Shift Roller Motor2:Homing ENG [0 or 1 / 0 / 1/step]
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
201
Sensor Shift Motor:Std Speed ENG [0 or 1 / 0 / 1/step]
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
202
Sensor Shift Motor:Mid Speed ENG [0 or 1 / 0 / 1/step]
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
203
Sensor Shift Motor:Mid-Low
Speed *D136 only
ENG [0 or 1 / 0 / 1/step]
This SP is only for D136 machine. Executing this SP on D135/D137/D138 machines may
cause SC error.
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
204
Sensor Shift Motor:Low Speed ENG [0 or 1 / 0 / 1/step]
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
205
Sensor Shift Motor:Homing ENG [0 or 1 / 0 / 1/step]
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
206
Bypass Bottom Plate Lift Motor: Up ENG
[0 or 1 / 0 / 1/step]
1: ON (Active)
0: OFF(Stop)
Beware that long hours of operation may occur breakdown.
207
Bypass Bottom Plate Lift Motor:
Down
ENG
[0 or 1 / 0 / 1/step]
1: ON (Active)
0: OFF (Stop)
Beware that long hours of operation may occur breakdown.
210
Charge DC Voltage: Bk ENG
[0 or 1 / 0 / 1/step]
1: ON (Active)
0: OFF (Stop)
Beware that long hours of operation may occur breakdown.
Output Check Table
789