Ricoh Pro C5110S - Page 799

005
Exit Motor ENG [0 or 1 / 0 / 1/step]
Operates the specified motor for a certain period of time for operation check.
006
Upper Junction Solenoid ENG [0 or 1 / 0 / 1/step]
Turns the specified Solenoid ON/OFF for operation check.
007
TE Stack Plate Motor ENG [0 or 1 / 0 / 1/step]
Operates the specified motor for a certain period of time for operation check.
008
Paper Exit Open/Close Guide
Plate Motor
ENG [0 or 1 / 0 / 1/step]
Operates the specified motor for a certain period of time for operation check.
009
Punching Motor ENG [0 or 1 / 0 / 1/step]
Operates the specified motor for a certain period of time for operation check.
010
Punch Move Motor ENG [0 or 1 / 0 / 1/step]
Operates the specified motor for a certain period of time for operation check.
011
S-to-S Registration Detection
Move Motor
ENG [0 or 1 / 0 / 1/step]
Operates the specified motor for a certain period of time for operation check.
012
Lower Junction Solenoid Moto ENG [0 or 1 / 0 / 1/step]
Operates the specified motor for a certain period of time for operation check.
013
Jogger Motorc ENG [0 or 1 / 0 / 1/step]
Operates the specified motor for a certain period of time for operation check.
014
Positioning Roller Rotation Motor ENG [0 or 1 / 0 / 1/step]
Operates the specified motor for a certain period of time for operation check.
015
Stack Feed-out Motor ENG [0 or 1 / 0 / 1/step]
Operates the specified motor for a certain period of time for operation check.
016
Booklet Stapler Move Motor ENG [0 or 1 / 0 / 1/step]
Operates the specified motor for a certain period of time for operation check.
Output Check Table
797