bit 6 Method for determining the image rotation for the
edge to bind on.
Disabled Enabled
If enabled, the image rotation will be performed as they were in the specifications of
older models for the binding of pages of mixed orientation jobs.
The old models are below:
- PCL: Pre-04A models
- PS/PDF/RPCS:Pre-05S models
bit 7 DFU - -
1001 [Bit Switch]
006 Bit Switch 6 Settings 0 1
bit 0 DFU - -
bit 1 DFU - -
bit 2 DFU - -
bit 3 DFU - -
bit 4 DFU - -
bit 5 DFU - -
bit 6 DFU - -
bit 7 DFU - -
1001 [Bit Switch]
007 Bit Switch 7 Settings 0 1
bit 0
Print path Disabled Enabled
If enabled, simplex pages (in mixed simplex/duplex PS/PCL5 jobs only) and the
last page of an odd paged duplex job (PS, PCL5, PCL6), are always routed through
the duplex unit. Not having to switch paper paths increases the print speed slightly.
bit 1 DFU - -
bit 2 DFU - -
bit 3 DFU - -
SP1-XXX
809
To Next Page
Loading...
