9. Scanner SP Mode
SP1-XXX
1001
[Scan Nv Version]
Displays the scanner firmware version stored in NVRAM in a 9-digit format: Func.
Name_Model Name_History No.
005 - *CTL [- / - / -]
1005
[Erase Margin(Remote scan)]
Creates an erase margin for all edges of the scanned image.
If the machine has scanned the edge of the original, create a margin. This SP is activated
only when the machine uses TWAIN scanning.
001 Range from 0 to 5 mm *CTL [0 to 5 / 0 / 1 mm / step]
1009 [Remote scan disable]
001
- *CTL
[0 or 1 / 0 / 1 / step]
0: ON (enabled)
1: OFF (disabled)
This SP switches the TWAIN scanner function on/off. This is one of the scanner
application functions.
1010 [Non Display Clear Light PDF]
001
- *CTL
[0 or 1 / 0 / 1 / step]
0: Display, 1: No display
Display or Non display remote scan.
1011 [Org Count Display]
819
To Next Page
Loading...
