10. Software Version up
Software Update
Software Update Procedure
SD cards are used to update the software and to back up important data. Here is a list of the firmware
modules that can be updated or restored from an SD card:
• GW controller software
• BCU software
• LCDC (operation panel) software
• Network Sys (network) software
• Web Sys (Web Image Monitor)
• Document Server software
• NFA (Net File) software
• Printer application software
• Scanner application software
• DESS (encryption module) software
• Never connect or remove an IC card or SD card with the machine power turned on.
• Never turn the power off while the machine is downloading data from an IC card or SD card.
• The IC cards and SD card are precision items. Use them carefully.
• Never store IC cards or SD cards in a location where they are exposed to high temperature, high
humidity, or direct sunlight.
• Never bend an IC card or SD card, scratch it, or expose it to strong vibration.
• Before uploading data to an SD card, always confirm that its write-protect switch is off.
Doing the Software Update Procedure
An SD card with the software downloaded to it is necessary for this procedure.
1. Turn the main switch off.
2. Remove the SD card slot cover [A] ( x 1).
825
To Next Page
Loading...
