Ricoh Pro C5200 Series - Page 101

CIP Training Pro C5200 series
Adjustment Settings for Operators
Setting Values
Paper Feed Adjustment
062: [Wide LCT: Fan Setting]
Specify the movement of the Wide LCT fan.
If you set this to [On], air is discharged from the duct in the paper tray. By blowing air between the
sheets, sheets stuck to each other can be separated.
Setting Items Values
[Wide LCT: Fan Setting] [On]
[Off]
063: [Wide LCT: Fan Level]
Adjust the capacity of the Wide LCT fan.
If double feeding or misfeeding of paper occurs when this setting is at its default value, increase the fan
capacity.
Jk^llU%Wmhbg\k^Zl^ma^_Zg\ZiZ\bmrZg]UƽWmhk^]n\^bm(
Setting Items Max. Value Min. Value Step Unit
[Wide LCT: Fan Level] 100 10 10 %
064: [Pickup Assist]
Specify the paper feed roller movement.
If the paper feed roller fails to pick up paper and misfeeding of paper occurs, set this to [On].
Setting Items Values
[Pickup Assist] [On]
[Off]