Ricoh Pro C5200 Series - Page 125

CIP Training Pro C5200 series
Adjustment Settings for Operators
Setting Items Values
[Ppr Trns Contact Mode] [On]
[Off]
*1
The jitter occurs when the leading or trailing edge of paper that passes through the paper transfer unit is
transmitted to the drum unit via the immediate transfer belt, causing banding.
046: [Ppr Trns Gap: On Timing]
Adjust the timing for the intermediate transfer belt and the paper transfer unit to come into contact during
paper contact/ separation.
Use this to reduce the jitter
*1
produced during paper separation. Also, use this to reduce the image
quality degradation during the separation.
NhZ]cnlmma^\hgmZ\mmbfbg`&ik^llUƽWmhfZd^ma^iZi^k\hgmZ\m[^_hk^bmle^Z]bg`^]`^^gm^klma^
iZi^kmkZgl_^kkhee^k&Zg]ik^llU%WmhfZd^bm\hgmZ\mZ_m^kbmle^Z]bg`^]`^^gm^klma^iZi^kmkZgl_^k
roller.
Setting Items Max. Value Min. Value Step Unit
[Ppr Trns Gap: On Timing] 10 '/ 1 mm
*1
The jitter occurs when the leading or trailing edge of paper that passes through the paper transfer unit is
transmitted to the drum unit via the immediate transfer belt, causing banding.
047: [Ppr Trns Gap: Off Timing]
Adjust the timing for the intermediate transfer belt and the paper transfer unit to separate during paper
contact/separation.
Use this to reduce the jitter
*1
produced during paper separation. Also, use this to reduce the image
quality degradation during the separation.
NhZ]cnlmma^l^iZkZmbhgmbfbg`&ik^llUƽWmhfZd^ma^iZi^kl^iZkZm^[^_hk^bmlmkZbebg`^]`^^qbml_khf
iZi^kmkZgl_^kkhee^k&Zg]ik^llU%WmhfZd^bml^iZkZm^Z_m^kbmlmkZbebg`^]`^^qbml_khfma^iZi^kmkZgl_^k
roller.
Setting Items Max. Value Min. Value Step Unit
[Ppr Trns Gap: Off Timing] / '+* 1 mm
*1
The jitter occurs when the leading or trailing edge of paper that passes through the paper transfer unit is
transmitted to the drum unit via the immediate transfer belt, causing banding.