Ricoh Pro C5200 Series - Page 13

CIP Training Pro C5200 series
Adjustment Settings for Operators
[Machine: Image Quality]
For details about the following items, see page 32 "[Machine: Image Quality]".
No. Item Description
0201 [Adjust Image Density/
DEMS]
Execute image density control manually.
DEMS can reduce the variations in thickness that occur in
the intervals between the photoconductor and
development sleeve operations.
0202 [Image Density Adjustment
Execute Interval]
Specify the number of sheets the machine prints in full
color before it automatically adjusts image density.
0203 [Maximum Image Density] Specify the adhesion of toner to the drum surface and
intermediate transfer belt when image density adjustment
is executed.
0204 [Line Width] Adjust the intensity of the laser for transferring image
data to the drum.
0205 [Density Difference: Across
Feed]
Adjust the image density difference between the top and
bottom of the image.
0207 [Fusing Temperature on
Standby]
Adjust the set fusing temperature according to the
machine status.
0208 [Auto Color Selection
Setting]
Specify the number of sheets the machine prints in full
\hehkfh]^[^_hk^lpbm\abg`mh[eZ\d'Zg]'pabm^fh]^
when printing a job which involves full color printing
_heehp^][r[eZ\d'Zg]'pabm^ikbgmbg`(
0209 [Photoconductor Special
Mode]
Increase the amount of lubricant applied to the
photoconductor.
0210 [Smooth Fusing Belt] Polish the fusing belt to eliminate the scratches caused by
paper edges.
0211 [Fusing Ability by Feed
Speed]
Specify appropriately to improve transferability to thick
paper.
0212 [Slope for Envelope Nip
Width]
Adjust the slope for nip width between the fusing belt
and the pressure roller when an envelope is being fed.
0213 [PCU Potential] Adjust the current supplied to the photoconductor unit at
high temperature and humidity.
0214 [Fusing Belt Smoothing
Setting: Uneven Gloss]
Specify whether or not to automatically execute [For
Uneven Gloss (Short Time)] for smooth fusing belt.