CIP Training Pro C5200 series
Adjustment Settings for Operators
102: [Initial CPM Setting]
Select one of the three levels of copy/print speed reduction at normal room temperature and above.
If the temperature of the fusing unit fall below a certain point, the machine will reduce the copy/print
speed to increase fusibility. You can select from the three levels of copy/print speed reduction.
Pro C5200S
• [Do not Reduce]
65 cpm (full speed)
• [Reduce Level 1]
52 cpm (80% of full speed)
• [Reduce Level 2]
42 cpm (65% of full speed)
• [Reduce Level 3]
32 cpm (50% of full speed)
Pro C5210S
• [Do not Reduce]
80 cpm (full speed)
• [Reduce Level 1]
64 cpm (80% of full speed)
• [Reduce Level 2]
52 cpm (65% of full speed)
• [Reduce Level 3]
40 cpm (50% of full speed)
• The setting will take effect if the ambient temperature is higher than 17°C (62.6°F).
Setting Items Values
[Initial CPM Setting] [Do not Reduce]
[Reduce Level 1]
[Reduce Level 2]
[Reduce Level 3]
To Next Page
Loading...
