Ricoh Pro C5200 Series - Page 16

CIP Training Pro C5200 series
Adjustment Settings for Operators
[Preprocessing: LCT]
For details about the following items, see page 44 "[Preprocessing: LCT]".
No. Item Description
0108 [Wide LCT: Fan Level] Adjust the airflow of the wide LCT for fanning the sheets.
0109 [Wide LCT: Fan Timer] Adjust the duration of the airflow of the wide LCT for
fanning the sheets.
0110 [Pickup Assist] Specify the paper feed roller movement.
[Finishing: Finisher]
For details about the following items, see page 46 "[Finishing: Finisher]".
No. Item Description
0401 [Punch Position: With Feed] Adjust the horizontal position of the punch holes when
using Finisher SR4120 or Finisher SR4130.
0402 [Punch Position: Across
Feed]
Adjust the vertical position of the punch holes when using
Finisher SR4120 or Finisher SR4130.
0403 [Staple Position] Adjust the vertical position of the staples when using
Finisher SR4120 or Finisher SR4130.
0404 [Staple Position for Booklet] Adjust the horizontal position of the booklet staples when
using Finisher SR4130.
0405 [Folding Position for
Booklet]
Adjust the horizontal folding position when using Finisher
SR4130.
0406 [Folding Speed for Booklet] Adjust the speed of center folding by the SR4130
finisher. By reducing the folding speed, you can make
folds crisper.
0407 [Correct Punch Skew] Adjust skew correction for punching in order to reduce
punch skew due to difference in size, thickness, and
paper curl when using Finisher SR4120 or Finisher
SR4130.
0408 [Punch Skew Correction] Disable punch skew correction function if jams or
edgefolding problems occur particularly when punching
lightweight paper using Finisher SR4120 or Finisher
SR4130.