Ricoh Pro C5200 Series - Page 22

CIP Training Pro C5200 series
Adjustment Settings for Operators
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
[Tray] 0.0 3.0 '-(* 0.1 mm
[Bypass Tray]
[2 Sided]
[Paper Weight 1]
[Paper Weight 2]
[Paper Weight 3]
[Paper Weight 4]
[Paper Weight 5]
[Paper Weight 6]
[Paper Weight 7]
[Paper Weight 8]
[Paper Weight 9]
• If sheets are delivered face down, turn them over horizontally and check the image position.
Ư C_ma^e^Z]bg`'^]`^fZk`bghgMb]^+h_ma^iZi^kblmhhgZkkhp&iZi^kcZflfZrh\\nk(
Ư C_ma^mkZbebg`'^]`^fZk`bghgMb]^+h_ma^iZi^kblmhhgZkkhp&iZi^kcZflfZrh\\nkpa^g
printing on the back side of paper during duplex printing.
Paper feed direction
Leading-edge margin
Trailing-edge margin
CEZ586
• This setting is not effective for paper fed from paper trays with custom paper presets. For such
iZi^k&ma^oZen^li^\b_b^]bgU;]cCfZ`^Jhlbmbhgh_Mb]^+Qbma@^^]W&U;]cCfZ`^Jhlbmbhgh_
Side2 With Feed] in [Advanced Settings] takes precedence.