Ricoh Pro C5200 Series - Page 25

CIP Training Pro C5200 series
Adjustment Settings for Operators
If misfeeding of paper occurs when using loose paper such as thin or coated paper, increase the mask
width. This will increase the unprinted area at the leading edge, trailing edge, left edge, or right edge of
the paper and facilitate paper separation from the fusing belt.
Jk^llU%WhkUƽWmhZ]cnlmma^fZldpb]ma(
Paper feed direction
Right
Left
Trailing edge
Trailing edge
Leading edge
Leading edge
CWH205
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
U;]cnlm?kZl^GZk`bgh_F^Z]bg`
?]`^W
0.0 6.0 '-(* 0.1 mm
U;]cnlm?kZl^GZk`bgh_NkZbebg`
?]`^W
0.0 6.0 '3(* 0.1 mm
U;]cnlm?kZl^GZk`bgh_F^_m?]`^W 0.0 6.0 '3(* 0.1 mm
U;]cnlm?kZl^GZk`bgh_Lb`am?]`^W 0.0 6.0 '3(* 0.1 mm
• This setting is not effective for paper fed from paper trays with custom paper presets. For such
iZi^k&ma^oZen^li^\b_b^]bgU;]cnlm?kZl^GZk`bgh_F^Z]bg`?]`^W&U;]cnlm?kZl^GZk`bgh_
NkZbebg`?]`^WbgU;]oZg\^]M^mmbg`lWmZd^lik^\^]^g\^(