Ricoh Pro C5200 Series - Page 37

CIP Training Pro C5200 series
Adjustment Settings for Operators
0306: [Replaceable Parts Counter]
Display the counters for replaceable units.
0307: [Target Value for Replaceable Part]
Display the values at which replaceable units must be replaced.
When a counter reaches the specified value, a message reporting that the corresponding unit must be
replaced appears.
0308: [Execute Charge Roller Cleaning]
Clean the charge roller unit.
If the printed copies have vertical creases, clean the charger. This may reduce the problem.
Do not open any covers during the operation.
Setting Items Values
[Execute Charge Roller Cleaning] Press [OK].
0309: [Execute Developer Refreshing]
Replenish the developer manually. Replace part of the developer in the development unit.
If this operation is suspended due to, for instance, the main unit cover is opened during the operation,
exit from the Adjustment Settings for Skilled Operators menu, and then open and close the cover to
make the machine resume operation.
Setting Items Values
[All Colors] Press [OK].
[Cyan, Magenta, Yellow]
[Black]
[Cyan]
[Magenta]
[Yellow]