Ricoh Pro C5200 Series - Page 65

CIP Training Pro C5200 series
Adjustment Settings for Operators
0816: [Output Fan Setting]
Specify how the shift tray fan moves when using Finisher SR5070 or Booklet Finisher SR5080.
To separate sheets stuck together, blow air to them that are delivered to the shift tray.
Setting Items Values Default Value
[Output Fan Setting] [Auto]
[On]
[Off]
[Coated Paper: On]
[Large Size (More than
364 mm): On]
[Auto]
0817: [Output Fan Level]
Adjust the airflow of the shift tray for fanning the sheets when using Finisher SR5070 or Booklet Finisher
SR5080.
If sheets to the shift tray are stuck to each other when this setting is at its default value, increase the fan
capacity.
Setting Items Values Default Value
[Output Fan Level] [Auto]
[Increase Air Volume]
[Auto]
0818: [Staple Position for Booklet]
Adjust the horizontal position of the booklet staples when using Booklet Finisher SR5080.
Jk^llU%Wmhfho^ma^ihlbmbhge^_m&hkik^llUƽWmhfho^bmkb`amhgma^hi^g[hhde^m(
Paper feed direction
CDS024