Ricoh Pro C5200 Series - Page 94

CIP Training Pro C5200 series
Adjustment Settings for Operators
No. Item Description
074 [Second Transport Motor
Feed Speed]
Adjust the second transport motor's speed.
075 [Third Transport Motor Feed
Speed]
Adjust the third transport motor's speed.
077 [Relay Transport Motor
Feed Speed: CW]
Adjust the relay transport motor's rotation speed
(clockwise rotation).
078 [Relay Transport Motor
Feed Speed: CCW]
Adjust the relay transport motor's rotation speed
(counterclockwise rotation).
086 [Paper Output Motor
Speed]
Adjust the exit motor's speed.
087 [Switchback Entrance
Motor Speed]
Adjust the paper feed speed at the switchback entrance.
088 [Exit Switchback Motor
Speed: CW]
Adjust the switchback rollers' speed (clockwise rotation).
089 [Exit Switchback Motor
Speed: CCW]
Adjust the switchback rollers' speed (counterclockwise
rotation).
090 [2 Sided Transport Motor
Feed Speed]
;]cnlmma^,'lb]^]mkZglihkmfhmhk!lli^^](
091 [2 Sided Switchback Motor
Feed Speed: CW]
;]cnlmma^,'lb]^]lpbm\a[Z\dfhmhk!lli^^]"\eh\dpbl^
rotation).
092 [2 Sided Switchback Motor
Feed Speed: CCW]
;]cnlmma^,'lb]^]lpbm\a[Z\dfhmhk!lli^^]
(counterclockwise rotation).
093 [2 Sided Exit Motor Speed] ;]cnlmma^,'lb]^]^qbmfhmhk!lli^^](
094 [2 Sided Transport Roller
Shift 1]
Adjust the roller's shift amounts produced by Shift System
1in the horizontal duplex paper transfer unit for duplex
printing.
095 [2 Sided Transport Roller
Shift 2]
Adjust the roller's shift amounts produced by Shift System
2 in the horizontal duplex paper transfer unit for duplex
printing.
096 [2 Sided Transport Roller
Shift Setting]
Disable the shift operation performed by the duplex
transfer unit.