2. WSD
This tab is highlighted whenever the machine is used as a WSD scanner.
3. [WSD Dest.]
Press to switch to the [Email] screen or [Scan to Folder] screen.
4. [Check Modes]
Allows you to confirm the scanning settings.
5. Destination field
The specified destination is displayed here. You can specify only one destination.
6. Destination list
The list of available destinations is displayed here.
If all of the destinations cannot be displayed, press [ ] or [ ] to move through the list.
7. Original and scanning settings
Allows you to specify scan settings and original feed types.
[DSM scanner] screen
This section explains the layout of the screen that allows you to send scan files using DSM.
1. DSM
This tab is highlighted whenever the machine is used as a DSM scanner.
2. [DSM Destination]
Press to switch to the [Email] screen or [Scan to Folder] screen.
3. [Check Modes]
Allows you to confirm the scanning settings.
How to Use the Screens on the Control Panel
65
To Next Page
Loading...
