To Next PageTo Next PageWhat to do if documents don't print from my Ricoh Copier?
If documents and reports do not print out from your Ricoh Copier, it might be due to the paper output tray being full. Remove the prints from the tray. Alternatively, there might be no paper left. In this case, load paper into the copier.
What to do if an error occurred on my Ricoh Copier?
If an error has occurred on your Ricoh Copier, it indicates that a function with the status "Error Occurred" in the [Check Status] screen is defective. Press [Check], read the displayed message, and then take the appropriate action.
How to turn on the display on Ricoh Copier?
If the display on your Ricoh Copier is turned off, the machine might be in Low Power mode. Touch the display panel or press one of the keys on the control panel to cancel Low Power mode. Alternatively, the machine could be in Sleep mode. Press the [Energy Saver] key or the [Check Status] key to exit Sleep mode.
How to turn on Ricoh Copier?
If your Ricoh Copier does not turn on, the AC power switch might not be turned on. Turn on the AC power switch.
What to do if the error message is still displayed on Ricoh Copier after removing jammed paper?
If an error message persists on your Ricoh Copier even after removing misfed paper, it's likely that paper is still jammed in the tray. Remove the jammed paper by following the procedures displayed on the control panel.
What to do if nothing happens when pressing [Check Status] or [Energy Saver] key on Ricoh Copier?
If nothing happens when you press the [Check Status] key or the [Energy Saver] key on your Ricoh Copier, the power might be turned off. Make sure the main power indicator is off, and then turn on the power.
What to do if the error message is still displayed on Ricoh Copier, even if the indicated cover is closed?
If an error message remains on the Ricoh Copier display even after closing the indicated cover, one or more of the covers that are not indicated are still open. Close all the covers of the machine.
Why are images printing on the reverse side of the paper on my Ricoh Copier?
If images are printing on the reverse side of the paper with your Ricoh Copier, you may have loaded the paper incorrectly. Load the paper correctly.
Why does my Ricoh Copier power off automatically?
If your Ricoh Copier turns off automatically, the Weekly Timer setting is likely set to [Main Power Off]. Change the Weekly Timer setting.
What to do if Ricoh Copier does not turn off after switching off the main power?
If the Ricoh Copier does not turn off 13 minutes after the main power is turned off, the machine cannot perform the shutdown procedure. Repeat the shutdown procedure. If the machine still does not turn off, turn off the AC power switch.
General| Print Technology | Laser |
|---|---|
| Color Print Speed (A4) | 71 ppm |
| Black Print Speed (A4) | 71 ppm |
| Print Speed (Color) | 71 ppm |
| Print Speed (Black) | 71 ppm |
| Maximum Print Resolution | 1200 x 4800 dpi |
| Monthly Duty Cycle | 300, 000 pages |
| Maximum Paper Size | 330.2 x 487.7 mm |
| Connectivity | Ethernet, USB, Wi-Fi |
| Paper Weight | 52 - 300 gsm |
| Duplex Printing | Standard |
