Horizontal white streaks appear.
This may occur when using thick paper.
Insufficient transfer current
Density fluctuation-like faint prints appear.
This may occur when printing at low temperature or when using thin coated paper.
Excessive transfer current
Small white spots appear.
This may occur when printing at high temperature.
• To adjust the following settings, pre-register the type of paper in use as a custom paper. For details
about registering custom papers, see "Specifying a Custom Paper", Preparation.
Solution:
• This solution only works when the thickness of the paper is equivalent to Paper Weight 4 or higher.
Do not try this as a solution when using paper with a thickness equivalent to Paper Weight 3 or
lower, as it may cause paper misfeeding.
7. Image Quality Problem: Full Page
106
To Next Page
Loading...
