• The printed image does not come off.
• The toner does not come off even if it is lightly rubbed by a nail.
• The toner does not come off even if it is rubbed by the cloth for cleaning the contact glass.
Residual Gloss (Gloss Ghost): Multiple
Multiple horizontal glossy lines appear.
Cause:
If an image covering a wide area is continuously printed, the toner stains the fusing belt.
This problem occurs because the glossy ghosting at the leading edge margin remaining on the fusing
belt.
This may occur if:
• Thick paper is used.
• A solid image is printed
• To adjust the following settings, pre-register the type of paper in use as a custom paper. For details
about registering custom papers, see "Specifying a Custom Paper", Preparation.
• If the glossy ghosting of the previous image pattern occurs, see page 151 "Uneven Gloss".
Solution:
Perform procedure (a). If the problem persists, perform procedure (b).
7. Image Quality Problem: Full Page
156
To Next Page
Loading...
