Taurus-C1 Training
150
Slide 150
Completing the Installation
Load the paper trays.
Make sure that the Tray Paper Settings are set up correctly.
Print the SMC Report (SP5990-6).
Make a test copy. Do ACC if necessary.
MUSIC Color Registration Adjustment
1. Push [User Tools].
2. Touch [Maintenance]> [Color Registration].
3. Touch [OK].
Check the Print Quality
There are a number of tests in the installation procedure
that you should do before the customer starts to use the
machine. See the service manual for details.
TCRU Setting
If the customer is participating in the TCRU program, the
TCRU feature must be initialized so the TCRU setting
menus can be displayed.
1. Go into the SP mode.
2. Execute SP5185-001 (TCRU: Set Machine).
SMC Report: SP5990-6 prints a list of the non-default SP code settings for future
reference.
¾ The SP5990-1 (All) printout is about 140 pages single-sided.
¾ SP5990-6 (non-default ) requires only about 5 sheets.
To Next Page
